Project Opportunities
Live UK building controls projects - BMS upgrades, controls replacement, HVAC, smart building, energy monitoring and commissioning. Find work that fits your specialism.
16 open opportunities
Fire Detection & Suppression Sy
**Please note this is a Market Engagement exercise to attract interest for our upcoming Tender. If you wish to be invited to participate in the tender please email declaration of interest to Procurement@Londonenergyltd.com** Spec: 3. Scope of Works The contractor shall provide a complete engineered fire detection and suppression system, including all labour, materials, plant, access equipment, design services, testing equipment, certification and documentation necessary to deliver a fully operational system. The protected scope comprises four individual turbine areas within the Turbine Hall. For tendering purposes, each turbine shall be assumed to have an approximate protected area of 15 m², giving an indicative total protected turbine area of approximately 60 m². Tenderers shall verify all dimensions, access constraints, hazard locations and coverage requirements during the site survey and shall base the final design on confirmed site measurements and risk assessment. • Site surveys and risk assessment of the Turbine Hall and protected turbine assets. • Design of the fire detection, alarm interface and suppression system. • Selection and supply of detectors, control panels, suppression equipment, pipework, nozzles, cylinders, pumps, valves, cabling, containment, signage and ancillary equipment. • Installation of all system components, including interfaces with existing fire alarm, plant control, shutdown, ventilation or building management systems where required. • Factory acceptance testing, site acceptance testing, commissioning and functional performance testing. • Provision of certification, operation and maintenance manuals, as-built drawings, cause-and-effect documentation and training. • Provision of warranty, defects support and proposals for ongoing inspection, testing and maintenance. 4. Regulatory and Standards Compliance The system and all works shall comply with all applicable UK legislation, regulations, approved guidance and recognised standards current at the date of tender and installation. The contractor shall identify and declare all applicable standards within their tender submission and shall state any proposed deviations. • Regulatory Reform (Fire Safety) Order 2005 and the duties of the Responsible Person. • BS 5839-1 for fire detection and fire alarm systems in non-domestic premises, including design, installation, commissioning and maintenance requirements. • Applicable BS EN 54 standards for fire detection and alarm components. • Applicable standards for the selected suppression technology, which may include BS EN 15004 for gaseous extinguishing systems, BS 8489 for industrial and commercial watermist systems, BS EN 12845 for sprinkler systems, or other relevant recognised standards appropriate to the proposed solution. • Where water mist is proposed, the system shall comply with BS 8489 or another applicable recognised standard for industrial and commercial water mist systems, together with manufacturer approvals, fire test evidence and any insurer requirements relevant to turbine or machinery-space oil-fire protection. • BS 7273 requirements for interfaces between fire detection systems and ancillary fire protection measures, where applicable. • Health and Safety at Work etc. Act 1974, CDM Regulations 2015, Electricity at Work Regulations 1989 and all applicable site safety requirements. • Manufacturer installation instructions, insurer requirements and industry best practice. 5. Technical Requirements 5.1 Fire Risk Basis The principal fire risk within the protected turbine areas arises from steam pipework operating at conditions and temperatures above the flash point of the oil used within the turbine systems. Oil pipework and steam pipework run adjacent to one another, increasing the likelihood that an oil leak, spray, mist or release could come into contact with hot steam pipework or other high-temperature surfaces and ignite. The fire detection and suppression design shall therefore be based on credible oil-release scenarios, including pressurised leakage, dripping, pooling, spray impingement, atomised mist and contact with hot pipework or adjacent hot surfaces. Tenderers shall explain how their proposed solution detects and suppresses fires originating from these scenarios at an early stage and how the design reduces the risk of fire escalation to adjacent turbine equipment, cable routes, insulation, lagging and structural elements. 5.2 Fire Detection • The detection system shall provide reliable early warning appropriate to the turbine risk profile and environmental conditions within the Turbine Hall, with particular consideration of oil leakage onto high-temperature steam pipework and associated hot-surface ignition scenarios. • The preferred detection technology is infrared flame detection. Tenderers shall propose IR flame detectors, or an equivalent or superior flame detection solution, and shall justify the suitability of the proposed technology for the turbine environ
JV SCS Multi-Site Utility Connection Works
We are seeking applications from suitably qualified and accredited Independent Connection Providers (ICPs), Self-Lay Providers (SLPs), and multi-utility contractors to deliver contestable utility connection works across several active construction sites in London. Please note that the estimated contract value shown is based on a per site average. The works encompass the design, procurement, excavation, installation, testing, and commissioning of primary utility infrastructure for: - Power (HV/LV distribution and substation connections) - Water (Main tapping, metering, chlorination, and adoption prep) - Telecommunications (Ducting, chambers, and fibre integration) SCOPE OF WORKS BY UTILITY a) Power Infrastructure: - Installation of High Voltage (HV) and Low Voltage (LV) cables. - Substation base construction, transformer positioning, and jointing. - Delivery of contestable works under UK Power Networks (UKPN) adoption standards. b) Water Infrastructure: - Main connections, boundary box installations, and site distribution pipework. - Pressure testing, chlorination, and water sampling under Thames Water / Affinity Water standards. c) Telecoms & Communications: - Installation of Openreach / Virgin Media / Altnets compliant ducting and footway chambers. - Cable pulling, lead-in installation, and box terminations. LONDON OPERATIONAL CONSTRAINTS & SITE CONDITIONS Contracts will take place in high-density urban environments. Bidders must demonstrate proven capability in managing: - NRSWA Compliance & Highway Authorities: Securing Section 50/171 licenses, managing Traffic Management (TM) schemes, and adhering to London Borough / TfL permit systems. - Sub-surface Utilities: Operating in congested underground service environments utilizing PAS 128 (Type B/A) utility mapping and GPR scanning prior to excavation. - Low Emission Requirements: Compliance with London's NRMM (Non-Road Mobile Machinery) emissions standards and FORS (Fleet Operator Recognition Scheme) Silver/Gold for site deliveries. CONTRACTUAL STRUCTURE We reserve the right to award this scope as a single multi-utility package or split the requirements into trade-specific lots (Water, Power, Telecoms) depending on response quality.
Tool Ref: 126596-(AK) Akrotiri Mole Steel Jetty - Entire Structure - Refurbish, CYPRUS
WC1857725 - AKI- CIDP Tool Ref: 126596 (AK)-Akrotiri Mole Steel Jetty - Refurbish Entire Structure * Please provide a detailed description of the notice you are adding: Demolish existing steel jetty, complete with concrete beam along with the structures/ buildings south of the proposed new quay wall. Reconstruct new jetty using both precast units and in-situ concrete, complete with foundation, relief prism, drainage system, including oil water separator and equipped with fenders, bollards, handrails, ladders and M&E services (power & water supply) related to the Mole jetting as well as lighting installation for both new jetty and other Mole area and various reinstatement works of the affected surfaces (concrete & asphalt). The Provisional Key Tender dates for the project are as follows: - Expression of interest: 20/07/2026 - Expression of interest return: 27/07/2026 - Invitation to Tender: 06/08/2026 - Tender Return Date: 16/10/2026 - Contract award: 20/12/2027 - Commencement of work: 07/01/2027 - Completion of work: 30/08/2027 Note: Due to Environmental Issues Works within water are to be completed by 30 April 2027. The completion of the works will be on 30/08/2028, considering the turtle nesting period falls between April and November when no works are allowed underwater. The currency of this project is Euro (€). The location of this project is Cyprus (British Forces, RAF Akrotiri). Additional information: Work commencement and completion dates will be subject to MOD DIO's agreement, as they will be dictated by the DIO Environmental Advisor to avoid the environmental restricted periods (e.g. pre-determined breeding periods, turtle nesting period, etc.). This will lead to phasing of the works. ATTACHMENTS: 1. EOI (expression of interest) form 2. PQQ (pre-qualification questionnaire) form Both forms must be completed and returned by the interested tenderers
GMP Electrical & Mechanical Works 2026/2027, La Paz, Bolivia
Works are essential electrical and mechanical upgrades, including testing and remedial works, replacement of key distribution boards, lighting upgrades to LED standards, and assessment of the lightning protection system. It also includes the replacement of selected air conditioning units and the installation of a new heating system across the property.
Replacement of Windows and Doors
Renfrewshire Council are seeking to enter into two (2) Contracts, Reactive Replacement Windows and Doors for Building Services and Replacement of Windows and Doors Programme for Housing Investment. ] There are two separate Contracts included within this Invitation to Tender as detailed below: Lot 1 - Reactive Replacement Windows and Doors (Contract 1) Lot 2 - Replacement of Windows and Doors Programme (Contract 2) Tenderers are invited to bid for one or both Lots. The Most Economically Advantageous tender for each Lot will be awarded the Contract. The Council reserves the right to award one Contract or both Contracts. This decision will be at the sole discretion of the Council.
Bounds Green School and Tetherdown Primary School - Condition Works
Bounds Green Primary School: To carry out services as set out in the Index Sheet including, validation of existing feasibility study (RIBA Stage 0-1), completed in April 2025, to undertake any required or outstanding surveys, develop the scope, specification, and cost for delivering the required condition works to building fabric, external areas, and building services. Delivery of RIBA Stages 2–6 to bring the building condition up to a compliant standard for educational use. Tetherdown Primary School: To carry out services as set out in the Index Sheet including, validation of existing feasibility study (RIBA Stage 0-1), completed in April 2025, to undertake any required or outstanding surveys, develop the scope, specification, and cost for delivering the required condition works to building fabric, external areas, and building services. Delivery of RIBA Stages 2–6
View opportunityMPCE BED STORE
The works comprise the phased refurbishment and reconfiguration of an existing area within St Helier Hospital to provide a new Bed Store and Medical Records Office. The successful contractor shall undertake all necessary architectural, mechanical, electrical and associated enabling works required to deliver a fully operational facility in accordance with current NHS Health Technical Memoranda (HTMs), Building Regulations and Trust standards. The scope of works includes, but is not limited to: Establishment of fully compliant infection prevention and control measures, including dust containment, temporary partitions, protection of adjacent hospital areas and phased working. Internal strip-out and removal of redundant fixtures, fittings, doors, partitions and associated services. Formation of new fire-rated partitions, alterations to existing openings and installation of new FD60 doorsets with associated ironmongery, glazing and access control modifications. Alterations to internal layouts to accommodate the proposed Bed Store and Medical Records Office, including relocation of doors and sink positions where required. Installation of new joinery, worktops, cupboards, shelving and associated fittings. Mechanical alterations including domestic hot and cold water services, drainage modifications, insulation, relocation of sanitary fittings and associated builders' work. Electrical alterations including strip-out of existing installations, complete rewiring where required, new containment, lighting, emergency lighting, small power, fire alarm modifications and associated testing and commissioning. Medical gas modifications where identified within the contract documents, undertaken by competent specialists in accordance with HTM 02-01 requirements. Builders' work associated with all mechanical and electrical installations, together with making good and reinstatement of all disturbed finishes. Testing, commissioning, certification, provision of as-built documentation and handover of all systems upon completion. All works shall be undertaken within a live acute hospital environment, maintaining safe operation of adjacent clinical services and complying with all Trust permit-to-work procedures, infection prevention requirements, NHS standards and statutory legislation. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18222. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18222 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.
ng homes: Mechanical & Electrical Services Maintenance Contract
Provision of planned preventative maintenance, reactive repairs, testing, inspection, and associated remedial works to mechanical, electrical, ventilation, air-conditioning, fire safety, and related building services installations within residential and retirement housing properties.
Walsall College lighting upgrade
Campus Lighting Upgrade project proposes a comprehensive replacement of legacy lighting systems with modern energy-efficient LED luminaires across campus buildings. The project includes upgrades to emergency lighting, installation of intelligent lighting controls and associated electrical testing and certification. The project forms a key component of the College's capital investment programme and supports strategic objectives relating to estate condition, sustainability, energy efficiency and the learning environment. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA17655. Not registered: Visit https://suppliers.multiquote.com then register and quote CA17655 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.
Measured Term Contract (MTC) for Planned, Reactive Servicing & Maintenance of Gas, Oil, Biomass, LPG Boilers inc Associated Parts
South Ayrshire Council are looking to establish a Measured Term Contract (MTC) for a suitably experienced and resourced Contractor who can deliver Planned and Reactive Servicing & Maintenance to Boilers within non-domestic properties covering a range of heating types including Gas, Electric, Bio-mass and LPG. The contract will be awarded to one Contractor who has the capacity and experience to fully service and maintain all of the various elements.
Planned Programme Works - July 2026
Albyn requires suitably qualified and experienced suppliers to undertake works under our 2026/27 planned programme activity across the 5No. Lots comprising Lot 1 - External Doors and Windows – North and Easter Ross; Lot 2 – Doors and windows – Inverness and South; Lot 3 – Doors and windows – Listed Properties; and Lot 4 – Heating System Replacements – Dimplex Quantum. Full details of the requirements, alongside property details can be found within the respective lot specification documents.
FOR THE DESIGN AND BUILD OF COMMUNITY HUB AND VICTORY HALL IMPROVEMENTS
Design and Build Contract - Community Hub and Victory Hall Improvements, Chigwell, Essex Chigwell Parish Council invites tenders from suitably qualified and experienced contractors for the design and build refurbishment and improvement of the Community Hub and Victory Hall, Chigwell, Essex. The project is jointly funded through the UK Shared Prosperity Fund (UKSPF) and Chigwell Parish Council. The available budget is up to £100,000 excluding VAT. The successful contractor will be responsible for the development of the detailed design, coordination of specialist inputs, construction works, commissioning, certification, and handover of the completed facilities. The scope includes, but is not limited to: Accessibility improvements to both buildings. Installation of accessible community kitchens. Creation and enhancement of community spaces and facilities. Security and storage improvements. Improvements to lighting, heating, ventilation, power and data infrastructure. Accessibility and fire safety upgrades. Internal reconfiguration works to improve functionality and community use. Associated building, mechanical and electrical works. Works at the Community Hub are intended to create a modern, accessible and flexible community facility supporting community services, volunteering, training, wellbeing initiatives and local engagement. Works at Victory Hall are intended to improve accessibility, restore kitchen facilities, enhance venue functionality and support increased community use and hire opportunities. Tenderers must demonstrate relevant experience in refurbishment, conversion or community facility projects and provide a fixed-price proposal, programme, methodology and outline design solution. Site visits are strongly recommended and can be arranged by appointment. Contract Type: Design and Build (anticipated JCT Design and Build Contract or equivalent). Tender Return Deadline: 14 August 2026. Contact for Tender Enquiries: Jason Selvarajah MSc Clerk & Proper Officer Chigwell Parish Council Email: clerk@chigwellparishcouncil.gov.uk
Biomass Heating Systems - Supply of Fuel Pellets
Argyll and Bute Council require an external supplier to provide a supply of Wood Pellet Fuel to 10nr Biomass Heating Systems across the estate.
View opportunityBiomass Heating Systems - Maintenance Services
This is a standard maintenance contract associated with 10 existing wood pellet fuelled biomass boiler installations. The contract allows for planned preventative maintenance/remediation and emergency maintenance attendance/support and contains elements of statutory, best practice and manufacturer recommended tasks. The biomass boilers are installed across 9 schools and a school hostel. This PIN is a republishing of a previous PIN due to an updated estimated contract value internally.
Gas Services and Repair Works & Associated Other Systems Works - Voids, Reactive Repairs and Adhoc boiler and full system Renewal Contract 2026 - 2029
Gas Services and Repair Works & Associated Other Systems Works - Voids, Reactive Repairs and Adhoc boiler and full system Renewal Contract 2026 – 2029
View opportunityMetering and Meter Data Services
YPO are looking for Suppliers to be appointed onto a Dynamic Purchasing System (DPS) for the provision of Metering and Meter Data Services. The DPS is designed to meet the needs of all public sector organisations which includes YPO's internal requirements and any of YPO's wholly owned associated or subsidiary companies. DPS contains the following categories: 1 Heat Metering and Heat Meter Services 2 Automatic Meter Reading for Water Supply and Wastewater 3 Data Collection, Metering Operator Services, Meter Asset Management & Sub Metering for Electricity 4 Data Collection, Metering Operator Services, Meter Asset Management & Sub Metering for Gas 5 Data Collection, Metering Operator Service, Meter Asset Management & Sub Metering for Gas & Electricity Please note that the deadline for initial round of submissions is 10th May 2021 at 14:00. Following the initial establishment, the DPS will remain open for any Suppliers to submit a bid at any point until the closing date of the DPS. 1.7 The DPS will cover the period from 16th July 2021 to 28th October 2028, subject to an annual review, incorporating price negotiations and KPI performance. Please note that this updated contract finder notice is to :- - Direct suppliers to the new e-tendering portal which can be accessed at http://ypo2.my.site.com/s/Welcome where you will be able to apply for the DPS and obtain the procurement documentation. - Update the start date of the DPS as described in the description section as evaluation took longer than expected due to the quality and volume of bids received. - Update YPO's contact details
Get new project opportunities by email
New BMS, controls, HVAC and energy projects, straight to your inbox. Free, unsubscribe anytime.